Fanwan DIY Fanwan DIY Yiwu sourcing & production WhatsApp

STAINLESS STEEL · YOUR LOGO

Custom Logo Pendants & Stainless Steel Charms

Send your logo and we turn it into a stainless steel pendant — laser engraved, etched or die stamped, with gold or silver plating. Built to hang on your own keychains, beadable pens and bag charms.

304

Stainless steel

Gold / Silver

Plating options

AI / EPS

Artwork needed

Stainless steel pendant blanks with gold plating for custom logo engraving

PRODUCTION METHODS

Three Ways to Put a Logo on Steel

The method decides how fine the detail can be, how the mark reads under light, and what the minimum order looks like. This is the first thing to settle before artwork.

MOST FLEXIBLE

Laser Engraving

A focused beam marks the surface. Best for fine text, small marks and one-off variations — no tooling needed, so the entry quantity is lowest.

Look: slightly matte, recessed mark

BEST CONTRAST

Chemical Etching

Metal is removed through a resist mask. Holds larger areas and plating contrast better than laser, which is why it is common on plated pendants.

Look: deeper, uniform recess

HIGHEST MOQ

Die Stamping

A cut die forms the outline and the relief. Needed for shaped pendants with raised edges, but the die cost means a real production run.

Look: sharp raised relief

We will tell you which method your artwork actually needs — and if laser engraving gets you 90% of the look at a fraction of the minimum, we will say so.

Specifications to confirm

SpecOptionsWhy it matters
Material grade304 / 316 stainless steel316 resists corrosion better; 304 is the standard choice
ThicknessThin sheet vs rigid plateToo thin reads as cheap in the hand
FinishMirror polish / brushed / matteDecides how the engraving catches light
PlatingGold / rose gold / silver / blackPlating thickness drives wear life
AttachmentTop loop / drilled hole / claspMust match your pen topper or keychain ring
EdgeFlat cut / rounded / bevelSharp edges snag fabric and thread

What to send with your logo

Most delays on custom pendants come from artwork, not production. Sending these up front avoids a round of revisions.

1. Vector artwork

AI, EPS, SVG or PDF. Vector keeps thin lines sharp; a flat PNG may need redrawing.

2. Minimum line width

Tell us the smallest detail that must survive. Very fine lines can disappear at small pendant sizes.

3. Finished size

Height and width in mm. Size drives both price and how much detail is realistic.

4. Attachment point

Where the loop or hole goes, and what it will hang from.

Frequently asked

What file format do you need?▼

Vector is best — AI, EPS, SVG or PDF. It scales cleanly and keeps thin lines sharp when engraved. A high-resolution PNG can work for simple marks, but fine detail may need redrawing first.

Laser engraving vs etching — what is the difference?▼

Laser engraving marks the surface with a beam — fine detail, slightly matte result. Chemical etching removes metal through a resist mask, giving a deeper, more uniform recess that usually holds plating contrast better on larger areas.

Which stainless steel grade is used?▼

304 is the common grade for pendants and charms — it resists tarnish and takes plating well. 316 is used where higher corrosion resistance is needed. Confirm the grade before plating.

Can it be plated gold or silver?▼

Yes — gold, rose gold, silver or black tones. Plating thickness drives both cost and how long the colour holds, so specify how hard the piece will be worn.

Can a logo pendant go on a beadable pen or keychain?▼

Yes, and it is the most common use. The pendant is made with a top loop, drilled hole or clasp so it fits a pen topper, bag charm or keychain ring.

Send your logo, get a real answer

We will confirm which method fits, what the minimum would be, and whether a die is worth it at your volume.

Chat on WhatsApp →